Operating Instructions for ERU Knife Gate Valve K1 with electric actuator
ERU Knife Gate Valves K1 are
- clamped between two flanges of the pipeline (wafer type) or
- screwed to the end flange of the pipeline as end-of-line valves.
The screwed connection with the pipeline is made from flange to flange by means of
bolts in the through-going holes. For the threaded blind holes the screwed connection
is made by means of stud bolts or bolts in the body components.
It is possible to roughly fasten the valve by means of the threaded holes.
The necessary connecting elements for the corresponding installation position are
shown in drawing No.
4E127 920
.
BA46E033
July 2005
Rev. 4
ERHARD-Armaturen
x
D-89502 Heidenheim
x
Postfach 1280
(07321) 320-0
(07321) 320 491 e-mail:info
@
erhard.de
Internet: http://www.erhard.de
Page 10 of 13
