Pressing the MONITOR BUTTON will also
clear any digits entered from the numeric keypad
and return the radio to the selected group display.
In addition, this button is used to toggle be-
tween group and regroup settings if the Dynamic
Regrouping mode (with deselect capability) has
been enabled by the site controller.
Conventional Mode
When the radio is operating in conventional
mode the MONITOR BUTTON is used to un-
squelch the receiver.
EMERGENCY BUTTON
When operating in trunked mode, pressing
and holding the red EMERGENCY BUTTON on
top of the radio for a programmable time period
will initiate an emergency call with voice operation
on the programmed home group. If no home
group is programmed into the radio, voice opera-
tion will be on the selected group.
S
KEY
The
S
key located on the keypad may be
programmed to select trunked groups and con-
ventional channels or it may be programmed to
select systems. See SYSTEM/GROUP/CHAN-
NEL SELECTION for details.
S
is also used to scroll through the pro-
grammed special call table when the special call
mode is enabled.
s
KEY
Pressing the
s
key on the keypad will
toggle scan operation on and off. When the radio
is scanning, the SCN status flag in the display will
Figure 2 - Scan Keypad
7
