35(42)
Datum/Date
Rev
Dokumentnr/Documentnr
Uppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved
Kontr/Checked
Tillhör/Referens-File/Reference
1999-07-15
F
1545-ASB 150 02 Uen
FAULT TRACING DESCRIPTION
Faktaansvarig - Subject responsible
This menu can be used to check the traffic that is offered on a certain location. It shows the number of
Base Stations within reach of the portable in order of their respective signal strength. The portable dis-
plays a list of up to 7 different Base Stations, the maximum a portable can see.
FP - Info
This menu allows scrolling through the Base Stations (/00../FF) list. The default Base Station is the first
Base Station mentioned in the All-FP+RSSI display; the one with the highest signal strength. By press-
ing `down/up', you can display other Base Stations. When a Base Station is not in the portable list, the
display remains blank. If it is, the display shows the data as specified in the lines above. `N' may change
during the display if another Base Station from the portable list is getting a higher/lower signal strength
than the one currently displayed.
Channel Info
Not applicable to maintenance
Time Slots
Not applicable to maintenance
Select PUN
This menu is useful for testing purposes when more systems cover the same area. It allows a forced se-
lection of one system on a portable that is programmed for both systems. By selecting a different PUN
an engineer can test Base Stations of different systems on the same spot without having to re-initialize
his portable.
When `A' is selected, the portable will automatically select systems for which it has access rights. After
switching on, the portable is always set to automatic selection.
FpSsFpSsFpSs
092A1518XX--
Fp
: Base Station number
Ss
: Signal strength of its best channel
XX : No more Base Station number detected
--
: No channel detected
N Fp Ss CB D
0 09 2A 11 0
N
: Number of Base Stations in list (0..6), see previous display
Fp
: Base Station number
Ss
: Signal strength of its best channel
C
: Number of channels in use on Base Station
B
: Number of channels in use on portable with current Base Station
D
: Number of time slots disabled on Base Station
(max. 10 seconds)
:
0 = no channels, portable locked on other Base Station
: 1 = beacon or traffic
: 2 = handover occurring
Select PUN
01234567 A
A
: Automatic selection
