EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
©
Ericsson AB 2010
Commercial in confidence
125 (200)
f.
Click on the adjacent
Apply
button to modify (if necessary) the Connection
Module Type.
g.
For ADSL/POTS card combinations, the “Enable POTS Pass Back” boxes
must be
unticked
for all ports 1 to 64. To do this quickly then:-
First select Port 1 box and
untick
it, press and hold down the shift button
and select the Port 64 box.
All 64 ports should now be unticked
, ie
disabled.
h.
Click on the
Apply
button (next to the ports), then the
Refresh
button to
confirm that all of the POTS Pass Back boxes are unticked for all ports 1 to
64. Select
Close
to close down the window.
i.
Repeat the steps c to h for other Connection Units where ADSL/POTS
cards combinations are installed.
j.
Close down the windows to return to the main LCT screen.
