EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
©
Ericsson AB 2010
Commercial in confidence
159 (200)
9.1.2.3
Enable all 64 ADSL Lines
The ADSL Lines must now be enabled.
a.
From the LCT main screen select the path;-
Configuration
→
xDSL Line Activation
b. Set
the
Slot:
box to the ADSL card slot to be re-enabled.
c. Select
the
~
Enable
radio button.
d.
Click on the
GO
button. Wait for all 64 lines to be enabled.
e.
Check the result is Found (Configured); 64 Updated: 64 Failed: 00.
If there are any failures click on the
View Error Log
button and read the
display. Any disabled lines will have to be enabled manually.
f. Select
the
~
Check
radio button.
g.
Click on the
GO
button. Wait for all 64 lines to be checked.
h.
Check the result is Found (Configured); 64 Enabled: 64 Disabled: 00.
If there are any lines Disabled, click on the
View Error Log
button and read
the display. Any disabled lines will have to be enabled manually.
