EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
©
Ericsson AB 2010
Commercial in confidence
168 (200)
c.
When the SHDSL x 32 Lines window appears click on the
SHDSL Line
to
be enabled or disabled then left click on the
Configure
button.
d.
Click on the
Status
tab.
e.
If the Disable button is greyed out, this indicates that the line is disabled.
f.
Click on the
Enable
button to enable the line.
g.
The Enable button should now be greyed out and the Disable button should
be available.
h.
If the Enable button is greyed out, this indicates that the line is enabled.
i.
Click on the
Disable
button to disable the line.
j.
The Disable button should now be greyed out and the Enable button should
be available.
9.2.2
Test 32 x SHDSL Cards
Test all 32 x SHDSL cards (02HAT00274AAE).
The
32 x SHDSL
lines are grouped as 1 to 4, 5 to 8, 9 to 12, 13 to 16, 17 to 20, 21
to 24, 25 to 28 and 29 to 32.
All SHDSL Lines should be tested from each group of four lines. This will ensure
that each line IC is tested.
