EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
©
Ericsson AB 2010
Commercial in confidence
41 (200)
4
Commissioning Requirements
4.1
Description Of Testing Activities
The testing described in this document is the functional testing on lines chosen by
sampling those present in the system.
During Section 5.2, only the Common Part unit in slot 1 is inserted in the EDA 2530
subrack.
Note:
The other units are inserted for configuration from Section 5.3.
4.2
Test Records
The commissioning test records at the end of this document must be completed as
the testing progresses. A complete set of Test Records must be completed for each
EDA 2530 (EDAxx01) Parent and Stand Alone shelf being commissioned.
When all testing has been completed successfully, both the Ericsson representative
and Customer’s representatives must complete the Certification of Tests Form at the
end of this document. If the Customer’s representative is not present on site enter
N/A (Not Available) for the Customer representative.
4.3
Preliminary Checks
4.3.1
Equipment Positioning
Check the equipment positioning corresponds to the implementation plan.
4.3.2
Card Equipping
Check that the correct quantity and type of equipment cards have been supplied to
the contract requirements. The electrical cards should be partially inserted into their
allocated slot positions, ensuring that the unit edge connectors do NOT make
accidental contact with the shelf connectors. Carefully insert the Connection Units
into the start of the shelf runner. Ensure that the unit is exactly level and then gently
slide the unit forward until a resistance is felt. A further gentle push on the unit front
panel will ensure that the unit connector engages with the shelf pin connections. Do
NOT
force the unit into the shelf, as this will damage the shelf edge connectors.
Check that the positions not occupied by cards have the appropriate covers fitted.
Refer to Section 2.4.2 for Unit Equipping Rules and Standard Configuration for
Cable and Wireless Parent and Stand Alone shelf.
