EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
©
Ericsson AB 2010
Commercial in confidence
98 (200)
7.9
Assign The IBM IP Address
With the IBM VLAN Sub-interface created, the IBM IP Address can now be
assigned. This is done by performing the following steps:-
a.
From the main LCT screen select the path,
Configuration
>
IP/Ethernet
Management
>
IP Interface Configuration
. The following screen will be
displayed:-
b.
Highlight an empty row in the table and click on the “
Details >>
” button, the
window will be expanded to display “Interface Data”.
c.
In the “L2 Interface Name” field select “
vlanCVID-SVID
” from the drop-
down list. Now modify this field to enter the CVID and SVID details for the
VLAN sub-interface built previously.
The “CVID” value is either
3200
,
200
,
1200
, or
2200
. Whilst the SVID value
will be either
21
or
22
, this information will be provided by the Network
Planner.
Examples of this field could be:-
vlan3200-22
(for the “Parent” EDA 2530)
or
vlan200-22
(for a “Child#1” EDA 2530)
or
vlan1200-22
(for a “Child#2” EDA 2530)
or
vlan2200-22
(for a “Child#3” EDA 2530)
d.
In the “IP Address” field, enter the
IBM IP address
, this will be provided in
the CWA “GigE Metronode DLE planning” document.
