APPENDIX 1
FAULT TRACING
No Power to the Radio
•
If the radio does not come on when you hold down
the
E
key, recharge or replace the battery. Refer
to the chapter
Batteries and Recharging.
SERV Indicator Does Not Come On
You have lost contact with the EDACS system and
you cannot place any calls. The reason for this is either:
•
The received signal is too weak. See the next
section,
Received Signal is Weak
•
You are in an area which is not covered by the
EDACS system selected.
Received Signal is Weak
If the radio displays CC SCAN often, move the radio
to obtain a stronger signal.
•
Large obstacles such as buildings, hills and moun-
tains can drastically affect the signal strength and
you may have to move to obtain a sufficiently
strong signal.
•
Indoors, it is usually best to use the radio near a
window.
50
Summary of Contents for EDACS IPE-200
Page 1: ...User s Manual EDACS Duplex Portables IPE 200 ericssonz...
Page 46: ...Inserting and Removing a Battery Standard Battery 46...
Page 54: ...NOTES 54...
Page 55: ...NOTES 55...
