Group And Channel Selection
Several methods, some of which depend on program-
ming, can be used to select a new group or channel.
These procedures are presumed to be starting from the
normal receive display.
METHOD 1: If group selection is programmed to the
SYSTEM/GROUP/CHANNEL knob, se-
lect a group by turning the SYS-
TEM/GROUP/CHANNEL knob to the de-
sired group number position (1-16). The
display registers the new group name on
line two. If the knob is moved to a position
greater than the number of programmed
groups, the highest programmed group
will remain selected.
METHOD 2: If group selection is programmed as the
primary function of
,
and
.
, se-
lect a group by pressing
,
or
.
to scroll through the group list. The display
registers the new group name on line two.
METHOD 3: Press
2
to enter the group select
mode and follow the selection mode rules
detailed earlier. If group selection is pro-
grammed to the SYSTEM/GROUP/
CHANNEL knob, direct access to groups
will not be available. Presses of
,
or
.
will scroll through different sets of
16 groups each (banks) if more than 16
groups are programmed into the radio.
The groups within each bank are then se-
lectable via the SYSTEM/GROUP/CHAN-
49
