DHCP Client CLI Commands
2/1553-ZAT 759 94 Uen B – December 2005
137
5.21
dhcpclient set interfaceconfig dhcpserverinterface
5.21.1 Syntax
dhcpclient set interfaceconfig {<name>|<number>}
dhcpserverinterface <interface name>
5.21.2 Description
This command allows the user to specify an existing IP interface on which the
automatically configured DHCP server can be created. If the interface name
does not correspond with an existing IP interface, or no interface name is
given, the DHCP server will be placed on the first LAN interface that it finds.
5.21.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
DHCP client interface. To display
client interface names, use the
dhcpclient list
interfaceconfigs
command.
N/A
number
A number that identifies an existing
DHCP client interface. To display
client interface numbers, use the
dhcpclient list
interfaceconfigs
command.
N/A
interface
name
The name that identifies an existing
IP interface. To display IP interface
names, use the
ip list
interfaces
command.
N/A
5.21.4 Example
-->
dhcpclient set interfaceconfig config1
dhcpserverinterface WAN