DHCP Client CLI Commands
2/1553-ZAT 759 94 Uen B – December 2005
139
5.23
dhcpclient set interfaceconfig givednstoclient
enabled|disabled
5.23.1 Syntax
dhcpclient set interfaceconfig {<name>|<number>}
givednstoclient {enabled|disabled}
5.23.2 Description
This command enables/disables whether DHCP client passes received DNS
server addresses to DNS client. If no DHCP interfaceconfigs have been added
to the system, by default DHCP client will not pass DNS server addresses to
DNS client.
5.23.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
DHCP client interface. To display
client interface names, use the
dhcpclient list
interfaceconfigs
command.
N/A
number
A number that identifies an existing
DHCP client interface. To display
client interface numbers, use the
dhcpclient list
interfaceconfigs
command.
N/A
enabled
DHCP client passes DNS server
addresses to DNS client.
disabled
DHCP client does not pass DNS
server addresses to DNS client.
disabled
5.23.4 Example
-->
dhcpclient set interfaceconfig config1
givednstoclient enabled