DHCP Client CLI Commands
144
2/1553-ZAT 759 94 Uen B – December 2005
5.28
dhcpclient set interfaceconfig server
5.28.1 Syntax
dhcpclient set interfaceconfig {<name>|<number>} server
<ipaddress>
5.28.2 Description
If
dhcpclient set dhcpinform
has been set to
enabled
, this command
will unicast the first DHCPINFORM message to the specific DHCP server at
the specified IP address. If the first unicast fails, the DHCPINFORM will default
to broadcasting its messages.
5.28.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
DHCP client interface. To display
client interface names, use the
dhcpclient list
interfaceconfigs
command.
N/A
number
A number that identifies an existing
DHCP client interface. To display
client interface numbers, use the
dhcpclient list
interfaceconfigs
command.
N/A
ipaddress
The IP address of a DHCP server
that DHCP client can use to obtain
configuration parameters. The IP
address is displayed in the following
format:
192.168.102.3
N/A
5.28.4 Example
-->
dhcpclient set interfaceconfig config1 server
192.168.101.2