DHCP Server CLI Commands
150
2/1553-ZAT 759 94 Uen B – December 2005
6.2
dhcpserver add interface
6.2.1 Syntax
dhcpserver add interface <ipinterface>
6.2.2 Description
This command sets DHCP server to operate on a specific IP interface. The IP
interface is defined as a DHCP server IP interface. By setting DHCP relay to
operate on other interfaces, you can simultaneously use DHCP server and
relay in your configuration.
6.2.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
ipinterface
The name of the existing interface
that you want DHCP server to
operate on. To display interface
names, use the
ip list
interface
command.
N/A
6.2.4 Example
-->
dhcpserver add interface IpInterface