DHCP Server CLI Commands
170
2/1553-ZAT 759 94 Uen B – December 2005
6.20
dhcpserver set fixedhost ipaddress
6.20.1 Syntax
dhcpserver set fixedhost <host name> ipaddress
<ipaddress>
6.20.2 Description
This command sets the IP address that will be allocated to a DHCP client by
the fixed host mapping.
Note:
You
are
not
allowed to create a fixed host mapping with an IP
address that is already present inside a configured, dynamic IP range
on a subnet. The reverse is also forbidden; you
cannot
add
addresses into a dynamic IP range that are already configured as
fixed host addresses. The CLI will display a warning if you attempt to
do this.
6.20.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
host name
A name that identifies an existing
fixedhost. To display fixedhost
names, use the
dhcpserver list
fixedhosts
command.
N/A
ipaddress
The IP address that is assigned to a
DHCP client based on the client’s
MAC address, displayed in the
following format:
192.168.102.3
N/A
6.20.4 Example
-->
dhcpserver set fixedhost myhost ipaddress
192.168.219.2