DHCP Server CLI Commands
174
2/1553-ZAT 759 94 Uen B – December 2005
6.24
dhcpserver set subnet assignautodomain
6.24.1 Syntax
dhcpserver set subnet {<name>|<number>} assignautodomain
{enabled|disabled}
6.24.2 Description
This command sets DHCP server to automatically pick up the domain name
configured in DNS relay and hand it out to DHCP clients on one or more of the
subnets being administered by DHCP server.
6.24.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
subnet. To display subnet names, use
the
dhcpserver list subnets
command.
N/A
number
A number that identifies an existing
subnet. To display subnet numbers,
use the
dhcpserver list
subnets
command.
N/A
enabled
DHCP server passes the local
device’s domain name (set up in DNS
relay) to all DHCP clients on the LAN.
disabled
DHCP server does not pass the local
device’s domain name (set up in DNS
relay) to all DHCP clients on the LAN.
disabled
6.24.4 Example
-->
dhcpserver set subnet sub1 assignautodomain enabled