Ethernet CLI Commands
212
2/1553-ZAT 759 94 Uen B – December 2005
9.2
ethernet add transport
9.2.1 Syntax
ethernet add transport <name> [<port>]
9.2.2 Description
This command adds a named ethernet transport and allows you to specify
which port it will use to transport ethernet data.
9.2.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
An arbitrary name that identifies the
transport. It can be made up of one or
more letters or a combination of letters
and digits, but it cannot start with a
digit.
N/A
port
The system port that is used to
transport ethernet data. You cannot
use the same port for more than one
ethernet transport at a time.
ethernet
9.2.4 Example
-->
ethernet add transport LanTransport eth_lan