Ethernet CLI Commands
2/1553-ZAT 759 94 Uen B – December 2005
217
9.7
ethernet set transport port
9.7.1 Syntax
ethernet set transport {<name>|<number>} port <port>
9.7.2 Description
This command sets the port that an existing Ethernet transport uses to
transport ethernet data.
9.7.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
Ethernet transport. To display
transport names, use the
ethernet
list transports
command.
N/A
number
A number that identifies an existing
Ethernet transport. To display
transport numbers, use the
ethernet
list transports
command.
N/A
port
The system port that is used to
transport ethernet data. You cannot
use the same port for more than one
ethernet transport at a time.
ethernet
9.7.4 Example
-->
ethernet set transport LanTransport eth_lan