IP CLI Commands
2/1553-ZAT 759 94 Uen B – December 2005
255
12.5 ip
attachvirtual
12.5.1 Syntax
ip attachvirtual <name> <real_interface>
12.5.2 Description
This command creates a virtual interface. The virtual interface is associated
with a ‘real’ IP interface that has already been attached to a transport using
the
ip attach
command. You can attach multiple virtual interfaces to one
‘real’ IP interface.
12.5.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing IP
interface that will be used as a virtual
interface. The IP interface should
not
have a transport attached to it. To
display interface names, use the
ip
list interfaces
command.
N/A
real_inter
face
A name that identifies an existing IP
interface. A virtual interface must be
associated with an existing ‘real’ IP
interface that is attached to a
transport. To display interface names,
use the
ip list interfaces
command.
N/A
12.5.4 Example
-->
ip attachvirtual ip_virtual ip_real