IP CLI Commands
2/1553-ZAT 759 94 Uen B – December 2005
275
12.22
ip show interface
12.22.1 Syntax
ip show interface {<name>|<number>}
12.22.2 Description
This command displays the following information about a named interface:
•
IP address and netmask address (if set). For virtual interfaces, the name
of the real interface that the virtual interface is attached to is also
displayed.
•
MTU (Maximum Transmission Unit).
•
Status of DHCP.
•
Status of TCP MSS Clamp.
•
Status of Source Address Validation.
•
Status of ICMP router advertisement.
•
Status of RIP send and RIP accept (versions one and two).
•
Status of RIP multicast.
12.22.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing IP
interface. To display interface names,
use the
ip list interfaces
command.
N/A
number
A number that identifies an existing IP
interface. To display interface
numbers, use the
ip list
interfaces
command. The number
appears in the first column under the
heading ID.
N/A