NAT CLI Commands
2/1553-ZAT 759 94 Uen B – December 2005
345
14.5
nat clear globalpools
14.5.1 Syntax
nat clear globalpools <interfacename>
14.5.2 Description
This command deletes all address pools that were added to a specific outside
interface using the
nat add globalpool
command.
14.5.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
interfacename The name of an existing security
interface (external or DMZ) created
and connected to an inside interface
(DMZ or internal) using the
nat
enable
command. To display
security interfaces, use the
security list interfaces
command.
N/A
14.5.4 Example
-->
nat clear globalpools extinterface