NAT CLI Commands
346
2/1553-ZAT 759 94 Uen B – December 2005
14.6
nat delete globalpool
14.6.1 Syntax
nat delete globalpool <name> <interfacename>
14.6.2 Description
This command deletes a single address pool that was added to a specific
outside interface using the
nat add globalpool
command.
14.6.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
global IP address. To display global
IP addresses, use the
nat list
globalpools
command.
N/A
interfacename The name of an existing security
interface (external or DMZ) created
and connected to an inside interface
(DMZ or internal) using the
nat
enable
command. To display
security interfaces, use the
security list interfaces
command.
N/A
14.6.4 Example
-->
nat delete globalpool gp1 extinterface