NAT CLI Commands
348
2/1553-ZAT 759 94 Uen B – December 2005
14.8
nat list globalpools
14.8.1 Syntax
nat list globalpools <interfacename>
14.8.2 Description
This command lists the following NAT address pool information for a specific
outside interface:
•
Address pool identification number.
•
Address pool name.
•
Type of inside interface (internal or DMZ).
•
Subnet status (true or false).
•
IP address - the outside network IP address or the first address in the
range of network pool addresses.
•
Mask/End Address - the outside subnet mask of the outside network IP
address or the last address in the range of network pool addresses.
14.8.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
interfacename The name of an existing security
interface (external or DMZ) created
and connected to an inside interface
(DMZ or internal) using the
nat
enable
command. To display
security interfaces, use the
security list interfaces
command.
N/A
14.8.4 Example
-->
nat list globalpools extinterface