PPPoA CLI Commands
2/1553-ZAT 759 94 Uen B – December 2005
415
16.28
pppoa set transport mbs
16.28.1 Syntax
pppoa set transport {<name>|<number>} mbs <max burst
size>
16.28.2 Description
This command applies to existing PVC transports – it does not apply to SVC
transports. It sets the maximum burst size (mbs) for the PPPoA transport.
This command is only valid if you set VBR or VBR RT as the QoS Class using
the
pppoa set transport qosclass
command.
16.28.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
PPPoA transport. To display transport
names, use the
pppoa list
transports
command.
N/A
number
A number that identifies an existing
PPPoA transport. To display transport
numbers, use the
pppoa list
transports
command.
N/A
maximum
burst size
Controls the maximum burst size for
VBR (Variable Bit Rage) and VBR RT
(VBR Real Time) channels. This value
overrides an existing BT value (if set).
The MBS can be any value between 0
and 100.
0
16.28.4 Example
-->
pppoa set transport pppoa1 mbs 10