PPPoA CLI Commands
416
2/1553-ZAT 759 94 Uen B – December 2005
16.29
pppoa set transport mcr
16.29.1 Syntax
pppoa set transport {<name>|<number>} mcr <min cell rate>
16.29.2 Description
This command applies to existing PVC transports – it does not apply to SVC
transports. This command set the minimum cell rate for an existing PPPoA
transport.
16.29.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
PPPoA transport. To display transport
names, use the
pppoa list
transports
command.
N/A
number
A number that identifies an existing
PPPoA transport. To display transport
numbers, use the
pppoa list
transports
command.
N/A
min cell rate Determines the minimum rate at which
ATM cells are allowed to be sent along
the PPPoA transport.
0
16.29.4 Example
-->
pppoa set transport pppoa1 mcr 0