PPPoA CLI Commands
420
2/1553-ZAT 759 94 Uen B – December 2005
16.32
pppoa set transport port
16.32.1 Syntax
pppoa set transport {<name>|<number>} port <port>
16.32.2 Description
This command applies to existing PVC transports – it does not apply to SVC
transports. This command sets the port that an existing transport uses to
transport PPPoA data.
The port/VPI/VCI combination must be unique for each transport.
16.32.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
PPPoA transport. To display transport
names, use the
pppoa list
transports
command.
N/A
number
A number that identifies an existing
PPPoA transport. To display transport
numbers, use the
pppoa list
transports
command.
N/A
port
The system port that is used to
transport ATM data.
N/A
16.32.4 Example
-->
pppoa set transport pppoa4 port a1