PPPoA CLI Commands
438
2/1553-ZAT 759 94 Uen B – December 2005
16.44
pppoa set transport vci
16.44.1 Syntax
pppoa set transport {<name>|<number>} vci <vci>
16.44.2 Description
This command applies to existing PVC transports – it does not apply to SVC
transports. This command sets the Virtual Circuit Identifier.
16.44.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
PPPoA transport. To display transport
names, use the
pppoa list
transports
command.
N/A
number
A number that identifies an existing
PPPoA transport. To display transport
numbers, use the
pppoa list
transports
command.
N/A
vci
Part of the ATM header. The VCI is a
tag that identifies which channel a cell
will travel over. The VCI can be any
value between 1 and 65535.
N/A
16.44.4 Example
-->
pppoa set transport pppoa4 vci 800