PPPoA CLI Commands
440
2/1553-ZAT 759 94 Uen B – December 2005
16.46
pppoa set transport welogin
16.46.1 Syntax
pppoa set transport {<name>|<number>} welogin
{none|auto|pap|chap}
16.46.2 Description
This command sets the authentication protocol used to connect to external
PPP servers (dial-out).
16.46.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
PPPoA transport. To display transport
names, use the
pppoa list
transports
command.
N/A
number
A number that identifies an existing
PPPoA transport. To display transport
numbers, use the
pppoa list
transports
command.
N/A
none
No authentication method is used.
auto
The authentication protocol used by
the remote PPP server is discovered
and used.
pap
Password Authentication Protocol; the
server sends an authentication
request to the remote user dialing in.
PAP passes the unencrypted
username and password and identifies
the remote end.
None