PPPoE CLI Commands
450
2/1553-ZAT 759 94 Uen B – December 2005
17.2
pppoe add transport dialout pvc
17.2.1 Syntax
pppoe add transport <name> dialout pvc <interface> <port>
<vpi> <vci> [accessconcentrator <concentrator>]
[servicename <servicename>]
17.2.2 Description
This command creates a PPPoE transport that performs dialout over a PVC
(Permanent Virtual Circuit). It allows you to specify the following information:
•
The PPP interface to the channel that the PVC will use.
•
The ATM port that will transport data.
•
VPI (Virtual Path Identifier).
•
VCI (Virtual Circuit Identifier).
•
Access
concentrator
(optional).
•
Service name (optional)
The port/VPI/VCI combination must be unique for each transport.
17.2.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
An arbitrary name that identifies the
transport. It can be made up of one or
more letters or a combination of letters
and digits, but it cannot start with a
digit.
N/A