PPPoE CLI Commands
2/1553-ZAT 759 94 Uen B – December 2005
459
17.8
pppoe set transport autoconnect
17.8.1 Syntax
pppoe set transport {<name>|<number>} autoconnect
{enabled|disabled}
17.8.2 Description
This command allows you to enable/disable the PPPoE autoconnect function.
If enabled, PPPoE automatically connects to TCP/IP whenever a user
requests TCP/IP packets from a public destination.
17.8.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
PPPoE transport. To display transport
names, use the
pppoe list
transports
command.
N/A
number
A number that identifies an existing
PPPoE transport. To display transport
numbers, use the
pppoe list
transports
command.
N/A
enabled
Enables PPPoE autoconnect.
disabled
Disables PPPoE autoconnect.
disabled
17.8.4 Example
-->
pppoe set transport pppoe1 autoconnect enabled