PPPoE CLI Commands
460
2/1553-ZAT 759 94 Uen B – December 2005
17.9
pppoe set transport autoconnect filter
17.9.1 Syntax
pppoe set transport {<name>|<number>} autoconnect filter
{add|delete} {tcpport <tcpportadd>|udpport <udpportadd>}
17.9.2 Description
This command allows you to add filters to TCP/UDP ports to prevent PPP from
auto-connecting with certain IP packets.
Certain IP packet types may force an unwanted autoconnect sequence.
Setting a filter on the port used by these packets prevents them from starting
PPP autoconnect.
The
delete
option allows you to clear an existing autoconnect filter.
Note:
This command is only effective if you have already enabled PPP
autoconnection using the
pppoe set transport autoconnect
command.
17.9.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
PPPoE transport. To display transport
names, use the
pppoe list
transports
command.
N/A
number
A number that identifies an existing
PPPoE transport. To display transport
numbers, use the
pppoe list
transports
command.
N/A
add
Adds an autoconnect filter to the
specified port.
N/A
delete
Deletes an existing autoconnect filter
from the specified port.
N/A