PPPoE CLI Commands
482
2/1553-ZAT 759 94 Uen B – December 2005
17.29
pppoe set transport localip
17.29.1 Syntax
pppoe set transport {<name>|<number>} localip <ip-
address>
17.29.2 Description
This command tells the PPP process the local IP address to be associated
with the client-end of an interface. This allows remote users to have dialin
access via the channel(s) that the interface is attached to.
17.29.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
PPPoE transport. To display transport
names, use the
pppoe list
transports
command.
N/A
number
A number that identifies an existing
PPPoE transport. To display transport
numbers, use the
pppoe list
transports
command.
N/A
ip-address
The IP address of the local ‘client-end’
of an interface displayed in the
following format:
192.168.103.2
0.0.0.0
17.29.4 Example
-->
pppoe set transport pppoe1 localip 192.168.103.2