PPPoE CLI Commands
2/1553-ZAT 759 94 Uen B – December 2005
505
17.45
pppoe set transport username
17.45.1 Syntax
pppoe set transport {<name>|<number>} username <username>
17.45.2 Description
This command sets a (dial-out) username on a named transport. The
username is required when PPP negotiation takes place and is supplied to the
remote PPP server for authentication.
The username and password can also be set together using one command as
shown in the example below.
17.45.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
PPPoE transport. To display transport
names, use the
pppoe list
transports
command.
N/A
number
A number that identifies an existing
PPPoE transport. To display transport
numbers, use the
pppoe list
transports
command.
N/A
username
A name that identifies a user and,
together with the dialout password,
enables a user to login to the remote
end. The username will be required by
the PPP server when the user wants
to login remotely. It can be made up of
one or more characters and/or digits.
To display the username, use the
pppoe show transport
command.
N/A
