PPPoE CLI Commands
510
2/1553-ZAT 759 94 Uen B – December 2005
•
Auto-connect status (true or false).
•
User Idle Timeout setting (in minutes).
•
Access
concentrator.
•
Service
name.
•
Port
name.
•
VPI (PVC transports only).
•
VCI (PVC transports only).
•
Quality of Service (QoS) class (PVC transports only).
•
Peak cell rate (PVC transports only).
•
Burst tolerance (PVC transports only).
•
Sustainable Cell Rate (SCR) (PVC transports only).
•
Maximum Burst Size (MBS) (PVC transports only).
•
Maximum Cell Rate (MCR) (PVC transports only).
•
Packet Priority Levels setting.
17.47.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
PPPoE transport. To display transport
names, use the
pppoe list
transports
command.
N/A
number
A number that identifies an existing
PPPoE transport. To display transport
numbers, use the
pppoe list
transports
command.
N/A
port
The system port that is used to
transport ATM data.
N/A
17.47.4 Example
-->
pppoe show transport pppoe2
PPP Transport: pppoe1