Security CLI Commands
556
2/1553-ZAT 759 94 Uen B – December 2005
19.15 security
list
mgmt-stations
Note:
Management station support is part of the Remote Access feature,
accessed via EmWeb using System > Remote Access. You cannot
configure Remote Access using the CLI.
19.15.1 Syntax
security list mgmt-stations
19.15.2 Description
This command lists Management Stations that were added to the Security
module using the
security add mgmt-station
command. It displays the
following information about Management Stations:
•
Management Station ID number.
•
Management Station name.
•
Subnet status (true or false).
•
IP address (of subnet or first address in range).
•
Subnet mask or last address of range.
•
Transport
number.
•
Port
number.
•
Idle timeout (in minutes).
•
Enabled status (true or false).
19.15.3 Example
-->
security list mgmt-stations
Management Stations:
ID | Name | Subnet | IP address | Mask/End Address | Transp | Port | Idle | Enable
----------------------------------------------------------------------------------------------
1 | ISP | true | 192.168.1.1 | 255.255.255.0 | 6 | 65535 | 15 | true
----------------------------------------------------------------------------------------------