Security CLI Commands
570
2/1553-ZAT 759 94 Uen B – December 2005
19.27
security set trigger secondaryendport
19.27.1 Syntax
security set trigger <name> secondaryendport <portnumber>
19.27.2 Description
This command sets the end of the secondary port number range for an
existing trigger. It allows you to restrict the ports that a trigger will open,
however, this is not usually necessary.
19.27.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
trigger. To display trigger names, use
the
security list triggers
command.
N/A
portnumber
Sets the end of the trigger’s secondary
port range.
65535
19.27.4 Example
-->
security set trigger t3 secondaryendport 1933