Security CLI Commands
2/1553-ZAT 759 94 Uen B – December 2005
571
19.28
security set trigger secondarystartport
19.28.1 Syntax
security set trigger <name> secondarystartport
<portnumber>
19.28.2 Description
This command sets the start of the secondary port number for an existing
trigger. It allows you to restrict the ports that a trigger will open, however, this
is not usually necessary.
19.28.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
trigger. To display trigger names, use
the
security list triggers
command.
N/A
portnumber
Sets the start of the trigger’s
secondary port range.
N/A
19.28.4 Example
-->
security set trigger t3 secondarystartport 1923
