SNMP CLI Commands
622
2/1553-ZAT 759 94 Uen B – December 2005
20.14
snmp set config authentraps
20.14.1 Syntax
snmp set config authentraps {enabled|disabled}
20.14.2 Description
This command allows you to configure whether or not a trap is sent if a
request arrives from the SNMP manager with an invalid community name.
20.14.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
enabled
A trap is generated when an SNMP
request with an unrecognized
community name is received.
disabled
A trap is not generated when an
SNMP request with an unrecognized
community name is received.
N/A
20.14.4 Example
-->
snmp set config authentraps enabled