SNTP Client CLI Commands
636
2/1553-ZAT 759 94 Uen B – December 2005
21.10
sntpclient set timeout
21.10.1 Syntax
sntpclient set timeout <timeout>
21.10.2 Description
This command sets the received packet response timeout value (in seconds)
upon sync request initiation. After timeout, if the
sntpclient retry
command value is set, an attempt will be retried.
21.10.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
timeout
Sets the received packet response
timeout value (in seconds). This can
be any value between 0 and 30.
5
21.10.4 Example
-->
sntpclient set timeout 10