SNTP Client CLI Commands
2/1553-ZAT 759 94 Uen B – December 2005
637
21.11
sntpclient set retries
21.11.1 Syntax
sntpclient set retries <retries>
21.11.2 Description
This command sets the number of packet retry attempts when no response is
received from a timeserver. The SNTP client will send another packet for
synchronization after a timeout.
21.11.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
Retries
Sets the number (between 0 and 10)
of packet retry attempts made when
no response is received from a
timeserver.
2
21.11.4 Example
-->
sntpclient set retries 4