Web Server CLI Commands
690
2/1553-ZAT 759 94 Uen B – December 2005
25.10
webserver set telnetport
25.10.1 Syntax
webserver set telnetport <port>
25.10.2 Description
This command sets the Telnet port number that the Web Server process will
use for Telnet communication.
You must save your configuration (see the
system config save
command) and restart your system (see the
system restart
command) to
activate the Web Server settings.
25.10.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
port
A valid port number that must be
between 0 and 65535.
23
25.10.4 Example
-->
webserver set telnetport 200