manualshive.com logo in svg

Ericsson HM4x0, Reference Manual

The Ericsson HM4x0 Reference Manual is a comprehensive guide providing detailed instructions to help you efficiently operate and optimize your device. This user-friendly manual is available for download, absolutely free, from our website. Explore the full potential of your Ericsson HM4x0 by accessing the manual at 88.208.23.73:8080.

Share
Download
background image

Index 

2/1553-ZAT 759 94 Uen B – December 2005 

697

 

dhcpclient set interfaceconfig dhcpserverpoolsize, 

136 

dhcpclient set interfaceconfig forcerenew 

enabled|disabled, 139 

dhcpclient set interfaceconfig givednstoclient 

enabled|disabled, 140 

dhcpclient set interfaceconfig givednstorelay 

enabled|disabled, 141 

dhcpclient set interfaceconfig interface, 142 
dhcpclient set interfaceconfig noclientid, 143 
dhcpclient set interfaceconfig requestedleasetime, 

144 

dhcpclient set interfaceconfig server, 145 
dhcpclient set reboot, 146 
dhcpclient set retry, 147 
dhcpclient show, 148 
dhcpclient update, 149 
dhcpserver add fixedhost, 155 
dhcpserver add interface, 151 
dhcpserver add subnet, 157 
dhcpserver clear fixedhosts, 158 
dhcpserver clear interfaces, 152 
dhcpserver clear subnets, 159 
dhcpserver delete fixedhost, 160 
dhcpserver delete interface, 153 
dhcpserver delete subnet, 161 
dhcpserver enable|disable, 162 
dhcpserver forcerenew, 163 
dhcpserver list fixedhosts, 164 
dhcpserver list interfaces, 154 
dhcpserver list options, 165 
dhcpserver list subnets, 167 
dhcpserver set allowunknownclients, 168 
dhcpserver set bootp, 169 
dhcpserver set defaultleasetime, 170 
dhcpserver set fixedhost ipaddress, 171 
dhcpserver set fixedhost macaddress, 172 
dhcpserver set fixedhost maxleasetime, 173 
dhcpserver set maxleasetime, 174 
dhcpserver set subnet assignautodomain, 175 
dhcpserver set subnet defaultleasetime, 176 
dhcpserver set subnet hostisdefaultgateway, 177 
dhcpserver set subnet hostisdnsserver, 178 
dhcpserver set subnet maxleasetime, 179 
dhcpserver set subnet subnet, 180 
dhcpserver show, 181 
dhcpserver show subnet, 182 
dhcpserver subnet add iprange, 183 
dhcpserver subnet add option, 184 
dhcpserver subnet clear ipranges, 186 
dhcpserver subnet clear options, 187 
dhcpserver subnet delete iprange, 188 
dhcpserver subnet delete option, 189 

dhcpserver subnet list ipranges, 190 
dhcpserver subnet list options, 191 
dhcpserver update, 192 
dnsclient add searchdomain, 194 
dnsclient add server, 195 
dnsclient clear searchdomains, 196 
dnsclient clear servers, 197 
dnsclient delete searchdomain, 198 
dnsclient delete server, 199 
dnsclient list searchdomains, 200 
dnsclient list servers, 201 
dnsrelay add server, 203 
dnsrelay clear servers, 204 
dnsrelay delete server, 205 
dnsrelay enable|disable, 206 
dnsrelay list servers, 208 
dnsrelay set hostname, 209 
dnsrelay set landomainname, 210 
dnsrelay show, 207 
dnsrelay show landomainname, 211 

E

 

ethernet add transport, 213 
ethernet clear transports, 214 
ethernet delete transport, 215 
ethernet list ports, 216 
ethernet list transports, 217 
ethernet set transport port, 218 
ethernet show transport, 219 

F

 

firewall add portfilter, 230 
firewall add validator, 239 
firewall clear portfilters, 233 
firewall delete portfilter, 234 
firewall delete validator, 241 
firewall enable|disable, 221 
firewall list policies, 228 
firewall list portfilters, 235 
firewall list validators, 242 
firewall set securitylevel, 222 
firewall show policy, 229 
firewall show portfilter, 237 
firewall show validator, 243 
firewall status, 227 

I

 

igmp set forwardall, 245 
igmp set upstreaminterface, 246 
igmp show forwardall, 248 
igmp show status, 249 

Summary of Contents for HM4x0































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for HM4x0

Udoo NEO Step-By-Step Manual preview
NEO
Brand: Udoo Pages: 7
IEI Technology KINO-KBN-i2 Quick Installation Manual preview
KINO-KBN-i2
Brand: IEI Technology Pages: 21
ADC HiGain HLU-231 List 8F Quick Installation preview
HiGain HLU-231 List 8F
Brand: ADC Pages: 7
e-con Systems ACC-CX3RDK-CU5640 Getting Started Manual preview
ACC-CX3RDK-CU5640
Brand: e-con Systems Pages: 9
EnGenius ETR9360 Quick Start Manual preview
ETR9360
Brand: EnGenius Pages: 3
Renesas H8/3864 Series User Manual preview
H8/3864 Series
Brand: Renesas Pages: 20
Advantech ARK-1380 User Manual preview
ARK-1380
Brand: Advantech Pages: 50
QNAP Turbo NAS TVS-71 Series Hardware User Manual preview
Turbo NAS TVS-71 Series
Brand: QNAP Pages: 51
Longshine LCS-8170 User Manual preview
LCS-8170
Brand: Longshine Pages: 35
Z3 Technology DM8168-MOD-35 Manual preview
DM8168-MOD-35
Brand: Z3 Technology Pages: 22
Lantronix N-FXE 02B Series User Manual preview
N-FXE 02B Series
Brand: Lantronix Pages: 10
TRENDnet TDM-C400 User Manual preview
TDM-C400
Brand: TRENDnet Pages: 205
NuDAQ ACL-8112 Series User Manual preview
ACL-8112 Series
Brand: NuDAQ Pages: 92
Tripp Lite N002-007-BK Specification Sheet preview
N002-007-BK
Brand: Tripp Lite Pages: 3
National Instruments NI ELVIS III Getting Started preview
NI ELVIS III
Brand: National Instruments Pages: 37
Cambium Networks ePMP Elevate Quick Start Manual preview
ePMP Elevate
Brand: Cambium Networks Pages: 7
Epson USB User Manual preview
USB
Brand: Epson Pages: 8
Epson EFM144FP Specification preview
EFM144FP
Brand: Epson Pages: 2

Brands by name

Popular brands

Load more brands