Bridge CLI Commands
78
2/1553-ZAT 759 94 Uen B – December 2005
4.37
bridge set interface numtrafficclasses
4.37.1 Syntax
bridge set interface {<name>|<number>} numtrafficclasses
<numtrafficclasses>
4.37.2 Description
This command specifies the number of traffic classes supported by the bridge
interface.
4.37.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
bridge interface. To display interface
names, use the
bridge list
interfaces
command.
N/A
number
A number that identifies an existing
bridge interface. To display interface
numbers, use the
bridge list
interfaces
command. The
number appears in the first column
under the heading ID.
N/A
numtraffic
classes
A value that specifies the number of
traffic classes supported by the
bridge interface. It can be any value
between 1 and 8. See the
bridge
show interface
trafficclassmap
to see the
number of traffic classes supported
by an interface, and also the traffic
class mapping.
4.37.4 Example
-->
bridge set interface bridge1 numtrafficclasses 7
