Bridge CLI Commands
2/1553-ZAT 759 94 Uen B – December 2005
79
4.38
bridge set interface trafficclassmap
4.38.1 Syntax
bridge set interface {<name>|<number>} trafficclassmap
<pri0> <pri1> <pri2> <pri3> <pri4> <pri5> <pri6> <pri7>
4.38.2 Description
This command specifies the mapping of regenerated priority to their traffic
class value. See the
bridge show interface trafficclassmap
command to see the traffic class mapping.
4.38.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
bridge interface. To display interface
names, use the
bridge list
interfaces
command.
N/A
number
A number that identifies an existing
bridge interface. To display interface
numbers, use the
bridge list
interfaces
command. The
number appears in the first column
under the heading ID.
N/A
pri0
The traffic class to which the
regenerated priority with value 0
should be mapped.
0
pri1
The traffic class to which the
regenerated priority with value 1
should be mapped.
1
pri2
The traffic class to which the
regenerated priority with value 2
should be mapped.
2
pri3
The traffic class to which the
regenerated priority with value 3
should be mapped.
3
