Bridge CLI Commands
92
2/1553-ZAT 759 94 Uen B – December 2005
4.50 bridge
add
fwdunreginterface independent
4.50.1 Syntax
bridge add fwdunreginterface independent
{<vlanname>|<vlannumber>} <interfacename>
4.50.2 Description
This command adds an interface to the egress interface list of the Forward
Unregistered Group of the named VLAN. The Forward Unregistered Group
represents the set of interfaces to which all the multicast frames would be
forwarded whose destination MAC address have no other forwarding
information available.
4.50.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
vlanname
The name of an existing VLAN. See
the
bridge add vlan
command
to configure a new VLAN.
N/A
vlannumber
A number that identifies an existing
VLAN. To display the list of statically
configured VLANs, use the
bridge
list static vlans
command.
The number appears in the first
column under the heading ID.
N/A
interface
name
The name of a bridge interface that
has previously been added and
attached to a transport using the
bridge add interface
and
bridge attach
commands.
N/A
4.50.4 Example
-->
bridge add fwdunreginterface independent VLAN_1
bridge1