the selected group is on the scan list, the
‘S" status flag will show in the display.
In conventional mode, pressing and
releasing 2nd and then pressing A/D
(shifted SCAN button) will scroll the se-
lected channel’s scan priority between
non-priority scan ("S" status flag), priority-
two scan ("2" status flag), priority-one scan
("1" status flag) and no scan (no status
flags).
Scan must be turned off("SCN" status
flag off) before groups or channels can be
added to or deleted from the scan list.
LOCK BUTTON
(Scan And System ModeIs Only)
The radio’s keypad can be locked to
prevent accidental activations. To lock the
keypad, simultaneously press the 2nd and
LOCK (shifted SPC); "LOCKED" will be
displayed when the keypad is locked. To
unlock the keypad, press the 2nd and
LOCK buttons again; ‘UNLOCKED" will be
displayed momentarily.
STO BUTTON
(Shifted Digit 1 - System Model Only)
STO (shifted digit 1) allows ten (10)
telephone numbers and ten (10) radio ID
numbers to be stored and later recalled
with the RCL button.
Store a telephone number by entering
the number (up to 29 digits) followed by an
asterisk (*). Next, enter the storage loca-
tion (1 - 10) and press and release 2nd and
then press STO. "STORED" will be dis-
played for two seconds.
Store individual radio ID numbers by
entering the ID number (1 - 16382) fol-
lowed by a pound sign (#). Next enter the
storage location (1 - 10) and press and
r e l e a s e 2 n d a n d t h e n p re s s S TO.
‘STORED’ will be displayed for two sec-
onds.
RCL BUTTON
(Shifted Digit 3 - System Model Only)
RCL allows the previously stored tele-
phone or radio ID numbers to be recalled.
To recall a number first enter an * or # (*
for telephone number, # for radio ID num-
ber) and then enter the storage location (1
- 10). Next press and release 2nd and then
11
Summary of Contents for M-PA EDACS
