press RCL and the recalled number will be
displayed.
CLR BUTTON
(Shifted # Button-System Model Only)
To clear the last digit entered, press
and release 2nd and then press CLR
(shifted # button). Holding CLR down will
repetitively clear previous digits. The radio
will return to the last operating state when
all entered digits are cleared.
STS BUTTON
(Shifted Digit - System Model Only)
The STS button will be used for future
status operations.
INDICATORS
The radio’s liquid crystal display (LCD)
located on the front panel has eight (B)
alphanumeric characters and various
status flags located above and below the
alphanumeric characters. This display
provides indications of the current operat-
ing system, group or channel and it dis-
plays various other messages such as
special call ID names or numbers, and
telephone interconnect numbers. If pro-
grammed on, LCD backlighting will turn on
for a short period anytime an active button
is pressed or the CONTROL KNOB is ro-
tated.
The status flags located along the top
and bottom of the display indicate operat-
ing modes and conditions as follows:
EMG
EMerGency mode - On indicates
an emergency call has been initi-
ated by the user. Flashing indi-
cates an emergency call has
been received.
NC
No Control channel- On indi-
cates the radio is not receiving
t h e t r u n k e d c o n t r o l c h a n -
nel. Flashing indicates the
trunked system is in a failsoft
condition (supervisory radios
only).
HI
Figure 7 - Liquid Crystal Display
12
Summary of Contents for M-PA EDACS
