INDIVIDUAL CALL - If an indi-
vidual call (a call directed to only
one radio) is received, the radio
will unsquelch on the assigned
channel and the "BSY" status
flag will turn on. "*INDV*", the
originators ID number, or the
caller’s name (if programmed) is
displayed and the "MSG" status
flag flashes. Adjust the volume
as necessary.
Responding to an individual call
prior to the programmed call-
back time-out period will auto-
matically direct the transmission
to the originating unit on an indi-
vidual basis.
The "MSG" status flag will re-
main flashing even after the indi-
vidual c a ll time -out period
expires. On a Scan or System
model radio, press the SPC but-
ton (SPecial Call) to call the
originating unit back after the
time-out period has expired. The
originator’s ID or name will be
displayed. Follow the proce-
dures for sending a special call.
Sending A Message
1.
Turn the radio on, set the receive
audio level and select the de-
sired system and group.
2.
Observe the display for the ab-
sence of the "BSY" status flag to
ensure no one is transmitting on
the selected group.
3.
Press and hold the PTT BUT-
TON. The radio will perform the
n e c e s s a r y s i g n a l l i n g r e -
quired to obtain a communica-
tion channel.
4.
When the channel has been ac-
quired, the "TX" and "BSY"
s t a t u s flags are dis p layed
and the channel access alert
tone (one beep) sounds.
5.
Hold the radio approximately
three inches from the mouth and
speak into the microphone in a
normal voice.
6.
Re le ase the PTT BUTTON
when the transmission is com-
18
Summary of Contents for M-PA EDACS
