The radio will not scan when the emer-
gency mode is enabled ("EMG" status flag
is on).
The following procedures outline scan
operations for trunked groups. See the
conventional mode operating procedures
for specific procedures on conventional
channel scanning.
Adding Groups To And DeIeting
Groups From The Scan List
1.
Scan must be off to add groups
to and delete groups from the
scan list. The "SCN" status flag
will be on if scan is on. If neces-
sary, toggle scan operation off
by pressing SCAN.
2.
Select the desired group to be
added to or deleted from the
scan list. The "S" status flag will
be on if the group is presently on
the scan list.
3.
Toggle the "S" status flag on or
off, as desired, by pressing 2nd
and then A/D (shifted SCAN but-
ton). When the "S" status flag is
on, the group is on the scan list.
When the "S" status flag is off,
the group has been deleted from
the list and will not be scanned.
Using Scan
Toggle scan operation on by pressing
SCAN. The "SCN" status flag will turn on
when the radio is scanning.
When a group on the scan list receives
a channel assignment, the radio unsquel-
ches on the assigned channel and the
group name is displayed.
The radio will continue scanning if a
new group is selected when scan is on.
Pressing the PTT BUTTON when
scan is on will cause the radio to transmit
on the selected group.
A "nuisance" group can be deleted
from the scan list by pressing 2nd-A/D
(shifted SCAN button) when the radio
stops scanning on the "nuisance " call. The
group will be deleted from the scan list.
Add the group back to the scan list by
turning the radio off and back on or by
21
Summary of Contents for M-PA EDACS
