6.
Listen for a reply and retransmit
as necessary.
Emergency Operation
(Conventional Mode)
To enable an emergency transmis-
sion, press the red EMERGENCY BUT-
TO N o n t h e t o p o f t h e r a d i o f o r
approximately one (1) second. If an emer-
gency channel is programmed, the radio
will switch to the emergency channel, turn
on the "EMG" status flag and transmit GE-
STAR emergency signalling. If no emer-
gency channel is programmed, the radio
will transmit GE-STAR emergency signal-
ling on the selected channel.
Scanning Conventional Channels
(Scan And System Models Only)
In conventional mode, the radio can be
programmed for non-priority scan, dual-
priority scan, or scan operation can be
entirely disabled. Scan programming op-
tions include a front keypad entered scan
list or a fixed scan list. Priority scan pro-
gramming options include a fixed priority-
one channel or the selected channel as the
priority-one channel.
Scan rate will vary depending upon the
number of channels on the scan list and
whether or not the radio is programmed to
scan for Channel Guard. Fewer channels
will result in a faster scan rate. All scan
functions are retained in memory when the
battery pack is removed.
The radio will not scan if the emer-
gency mode is enabled ("EMG" status flag
is on).
Adding Channels To And Deleting
Channels From The Scan List
1.
Scan must be off to add chan-
nels to or delete channels from
the scan list. If the "SCN" status
flag is on, press SCAN to turn
scan off.
2.
Select the desired channel to be
added to or deleted from the
scan list. If the selected channel
is currently on the list, the "S"
status flag will be on.
3.
Press 2nd-A/D (shifted SCAN
button) repetitively or hold A/D
down after pressing 2nd until the
29
Summary of Contents for M-PA EDACS
